TP-U Series Unit Type Body Surface Temperature Checker
TP-U is a body surface temperature measuring unit that installs 2000 pixels thermal imaging sensor. It quickly measures the body surface temperature and if detects the alarm point temperature (ex. 37.5°C) then the failure lamp lightens. Install at employee entrance, school entrance, crowded facilities, etc and simply check the fever.
Features
- Measures body surface temperature just in 3 seconds.
- Easy operation and self check by confirming standby, good and failure lamps.
- Hygienic because non-contact measuring.
- Prepared for stand-alone operation.
- Exclusive application software.
- Universal power supply, 100 to 240 VAC.
- Auto Correct : Screening function provided.
- Manual Correct : Manually set offset adjustment of measuring temperature.
Models
|
Models |
|---|
| TP-U0260ES |
Specifications
| Temp | 20 to 40°C |
|---|---|
| Accuracy rating | ±0.5°C at 37°C Ambient temperature 25°C) |
| Detector | Thermopile array Approx. 2000 Pixel |
| Wavelength | Center wavelength 10μm |
| Viewable Angle | 60°x 60° |
| Radius Resolution | 21.8mard |
| Frame Speed | 1Hz |
| Focus | Fixed Focus |
| Communication Interface | 10BASE-T/100BASE-TX |
| Contact Output | 2 points, Non voltage contact output |
| Power Supply | 100 to 240 V AC (universal power supply) |
| Working Temp | 0 to 40°C |
| Working RH | 10 to 80% (No dew condensation) |
| Weight | Approx. 0.7kg |
| Installation | Wall mounting, desktop or tripod (Please prepare the tripod at your side) |
| Warm up time | Approx. 60 minutes |