Optimal heating temperature
Update date: November 13, 2026
When it comes to heating in winter, people often wonder, "What temperature should I set it to?" or "How can I stay warm while keeping electricity costs down?"
A good guideline for room temperature when using heating is 20°C. However, the temperature set on the air conditioner and the actual room temperature are not always the same. Also, even at the same room temperature, the feeling of warmth can vary depending on humidity, airflow, and cold air coming in through windows.
This article explains everything from how to determine the appropriate heating temperature to the characteristics of heating appliances, tips for reducing energy costs, and precautions for safe use.
01
What is the appropriate temperature for heating?
A good guideline for indoor temperature in winter is 20℃.
In winter heating, a room temperature of 20°C is one of the recommended guidelines from an energy-saving perspective. The Ministry of the Environment's "Warm Biz" initiative also suggests that a room temperature of 20°C should be used as a guideline when heating.
However, 20°C is not an absolute standard that applies to everyone or every home. How people perceive cold varies depending on age, health, clothing, and activity level. In particular, if there are young children, the elderly, or people who are not feeling well, it is important not to lower the room temperature too much in order to save energy.
"Set temperature of 20°C" and "room temperature of 20°C" are different.
The temperature set on your air conditioner and the actual room temperature are not always the same. Air conditioners adjust their operation based on temperature information near the indoor unit, but this does not guarantee that the temperature will be uniform throughout the entire room.
When using the heating system, warm air tends to accumulate near the ceiling, while the area near the floor can become cold. It's important to check the temperature in the areas where people normally spend time, not just the temperature set on the remote control.
How much can you save by lowering the temperature setting by 1°C?
The energy required for heating is affected by factors such as the temperature difference between indoors and outdoors and the insulation of the house. According to estimates by the Agency for Natural Resources and Energy, under conditions of an outdoor temperature of 6°C and using an air conditioner (2.2kW) for 9 hours a day, lowering the heating setting temperature from 21°C to 20°C would result in an annual saving of 53.08kWh, or approximately 1,650 yen.
This is an estimate based on specific conditions, and the same savings cannot be expected in every home. Instead of drastically lowering the temperature to endure the cold, adjust it while checking the room temperature and comfort level.
02
Why do I feel cold even when the room temperature is 20℃?
Even in a room with the same temperature of 20°C, it can feel warm in some places and cold in others. This is because the feeling of warmth a person experiences is not determined solely by the temperature of the air.
Warm air is accumulating near the ceiling.
Warm air rises, and cold air tends to settle at the bottom. In a heated room, a temperature difference can occur between the ceiling and the floor, which can lead to cold feet.
If raising the temperature setting doesn't warm your feet, it's effective to reconsider the direction of the air conditioner's airflow or the air circulation using a fan.
The humidity is low and the air is dry.
In winter, the outside air tends to be dry, and when the room temperature rises due to heating, the relative humidity can decrease. The Tokyo Metropolitan Government's "pointer for a Healthy and Comfortable Living Environment" recommends an indoor humidity level of 40-60%.
Check temperature/humidity temperature with a thermometer and hygrometer, and humidification as needed. However, be careful not to increase the humidity too much, as this can easily lead to dew condensation and mold growth.
It is affected by cold air coming through the windows and walls.
Even if the room temperature is sufficient, you may feel cold if the surface temperature of windows and walls is low. The cool air near the window may then flow down to the floor, making your feet feel colder.
Using thick curtains, insulating sheets, and sealing gaps can help reduce heat gain and loss through windows.
The heating capacity is not suitable for the room conditions.
If the heating capacity is insufficient, it will be difficult to reach the set temperature, and the heater will likely run at a high setting for extended periods. When choosing an appliance, be sure to check not only the size of the room, but also its insulation, window size, and ceiling height.
03
How do you measure temperature and humidity?
To use heating efficiently, it's important not only to set the temperature but also to actually measure the conditions inside the room.
Place the thermometer in the area where you usually spend time.
Temperature readings near air conditioner vents, in direct sunlight, or near windows may differ from typical room temperatures. Place the thermometer near areas where people usually spend time, and compare readings at multiple locations as needed.
If you're particularly concerned about the cold around your feet, comparing the temperature at your usual height with the temperature near the floor will help you understand the temperature distribution.
Check both temperature and humidity.
Both room temperature and humidity are important factors when considering the indoor environment. Even at 20°C, the air can be dry, and excessively high humidity can lead to dew condensation.
Using temperature/humidity provides valuable information for adjusting heating and humidification settings.
What are the measurements used for?
The purpose is not simply to measure temperature and humidity. What's important is to use the measured information to make decisions that improve comfort and energy efficiency.
- Check if the room is properly heated.
- Review your air conditioner's temperature settings and airflow direction.
- Understand the temperature difference between your feet and the center of the room.
- Determine whether humidification or insulation measures are necessary.
- Compare the indoor environment before and after the countermeasures are implemented.
For more information on measurement concepts, please also refer to "What is sensing?", "What is temperature?", and "What is humidity?".
04
Features and comparison of heating appliances
Heating appliances differ in their heating methods, energy requirements, and usage precautions. Let's look at the characteristics of three representative types.
Air conditioners use heat from outside to provide warmth.
Air conditioners utilize a heat pump mechanism to transfer heat from the outside air into the room. Compared to heating appliances that directly generate heat using electricity, they are characterized by their ability to heat a room more efficiently.
While suitable for heating an entire room for extended periods, a temperature difference may occur between the floor and the ceiling. Heating capacity and efficiency also vary depending on the outside temperature, model, and installation conditions.
Oil fan heaters heat up quickly.
A kerosene fan heater is a heating appliance that uses the heat generated by burning kerosene to blow out warm air. It provides warmth relatively quickly after starting up, making it useful for warming up a cold room.
In open-type appliances, water vapor is generated by combustion. On the other hand, kerosene must be purchased and refueled, and regular ventilation during use is essential.
Gas fan heaters can heat up quickly.
Gas fan heaters are heating appliances that use city gas or LP gas to burn and blow out warm air. They are characterized by their quick start-up time after ignition and the fact that they do not require kerosene refueling.
In addition to requiring gas equipment, the equipment differs depending on whether it's for city gas or LP gas. Open-type equipment requires regular ventilation during use.
Comparing the features of different heating appliances
| Comparison items | air conditioner | Oil fan heater | Gas fan heater |
|---|---|---|---|
| heat source | Electricity and outside air heat | kerosene | City gas / LP gas |
| How to warm up | Easy to heat the entire room | Fast start-up | Fast start-up |
| Features | High-efficiency heating using heat pumps | Heat quickly with warm air | Heats up quickly without needing to refuel. |
| fuel refill | Not required | need | Not required |
| Ventilation due to combustion | Not required | need | need |
| Main points to note | Temperature distribution and outdoor unit status | Fueling, ventilation, and fire prevention | Gas equipment, ventilation, and fire prevention |
*This is a comparison of typical household appliances. Specifications may vary depending on the type and specifications. Even with air conditioners, ventilation is necessary to maintain good indoor air quality.
Heating costs vary depending on the unit price of electricity, kerosene, and gas, the amount of time used, and the insulation of the house. When selecting equipment, consider the area you want to heat and the effort required for maintenance.
05
Ways to reduce heating costs
To reduce heating costs, it's important not only to lower the temperature setting but also to implement measures to improve heating efficiency.
Adjusting the airflow direction of the air conditioner
When using a heater, warm air tends to rise, so directing the airflow downwards will help deliver warmth to your feet. However, if the warm air blows directly on your body for extended periods, it can become uncomfortable, so adjust the airflow and direction accordingly.
Use a circulating fan to circulate the air.
Circulating the warm air that accumulates near the ceiling can sometimes reduce temperature differences within a room. Try adjusting the airflow upwards, depending on the room's shape and the air conditioner's placement.
Reviewing window insulation
Since windows are easily affected by outside temperatures, thick curtains, insulating sheets, and gap sealing are helpful. It's also effective to let in sunlight during the day and close the curtains after sunset.
Utilize the automatic operation of the air conditioner
Automatic operation of an air conditioner adjusts its operation according to the room temperature and other factors. If you fix it to low operation, it may take longer for the room temperature to rise, which can actually decrease efficiency. Follow specifications of your air conditioner model and utilize automatic operation and automatic fan speed settings.
Regularly maintain your heating appliances.
When an air conditioner filter becomes clogged, airflow is obstructed, reducing efficiency. Clean it according to the instruction manual, and make sure not to block the air intake or outlet of the outdoor unit.
For oil and gas fan heaters, do not block the air intake or hot air outlet, and inspect and clean them using designate method.
Use main heating and supplemental heating separately.
One approach is to warm the entire room with an air conditioner and then use a blanket, a heated table (kotatsu), or a heated carpet to warm your feet. Another option is to use a kerosene or gas fan heater when you need to warm the room quickly.
However, since supplemental heating also incurs electricity and fuel costs, be sure to check the usage time and total energy consumption.
06
Precautions for safe use
Maintaining a comfortable heating environment requires both energy conservation and consideration for safety.
Ventilate oil and gas fan heaters regularly.
In open-type oil and gas fan heaters that use indoor air for combustion, insufficient ventilation can lead to incomplete combustion, potentially resulting in carbon monoxide poisoning.
The Japan Gas and Petroleum Equipment Manufacturers Association recommends ventilating the equipment for 1-2 minutes, once or twice per hour, while it is in use. Opening two or more windows to create an airflow path will allow for more efficient ventilation.
Refueling and gas connection must be done correctly.
When refueling a kerosene fan heater, always turn off the flame and follow the instructions in the user manual for safe operation. Do not use any fuel other than kerosene, and check the tank lid and for leaks.
When using a gas fan heater, use designate gas hose and check that there are no problems with the connection. It is also important not to confuse the city gas type with the LP gas type.
Keep flammable materials and aerosol cans away from the area.
Do not place flammable materials such as curtains, clothing, and paper near heating appliances. Spray cans and gas cartridges may also explode if placed in areas exposed to hot air. Please observe the safety distances designate in the instruction manual.
Review the use of old or malfunctioning equipment.
Accidents can occur with heating appliances that have been used for a long time due to deterioration of parts. The National Consumer Affairs Center of Japan has noted that industry associations recommend inspection and replacement of oil fan heaters every eight years. If you notice any unusual noises, odors, smoke, or combustion problems, stop using the appliance regardless of how long it has been in use and consult the manufacturer or retailer.
07
Key points for maintaining the appropriate temperature
The ideal heating temperature isn't determined by a single number. While 20°C is a good guideline for energy conservation, comfort levels vary depending on temperature distribution, humidity, airflow, the condition of windows and walls, clothing, and other factors.
Don't judge solely on the set temperature.
Even if your air conditioner is set to 20°C, the temperature in the areas where you normally spend time may not be 20°C. Also, even if the room temperature is comfortable, your feet or areas near windows might feel cold. First, check the room temperature, humidity, and the areas where you feel cold.
Combining measurement and countermeasures
It is important to measure the temperature and humidity, review air circulation, insulation, and heating methods according to the cause of the cold, and compare the indoor environment before and after the changes.
- Measure: Check the actual room temperature and humidity.
- Find the cause: Consider factors such as cold feet, cold air near windows, and dryness.
- Adjustments: Review wind direction, air circulation, insulation, and heating appliance usage.
- Verify: Check the room temperature, humidity, and comfort level after implementing the countermeasures.
The key to comfortable heating isn't raising the temperature setting, but rather understanding the actual indoor environment and making necessary adjustments. Let's aim for energy conservation in a way that is both healthy and manageable.
FAQ
FAQ
What is the appropriate temperature for heating?
A good guideline for winter heating is a room temperature of 20°C. However, the temperature at which you feel comfortable will vary depending on the insulation of your home, your physical condition, and your clothing. Don't be too fixated on 20°C; adjust the temperature appropriately if you feel cold.
If I set the air conditioner to 20°C, will the room temperature also become 20°C?
They won't necessarily be the same. Air conditioners operate based on temperature information near the indoor unit, so there may be a difference compared to the area where people are. Check the actual room temperature with a thermometer.
What should I do if I feel cold even at a room temperature of 20℃?
Check the direction of the air conditioner's airflow, air circulation, indoor humidity, and window insulation. For cold feet, a blanket or localized heating can be helpful. Don't endure the cold; adjust according to your physical condition.
What is the recommended humidity level when using heating?
A good guideline for indoor humidity is around 40-60%. Excessive humidification can cause dew condensation and mold, so adjust temperature/humidity while monitoring it with a thermometer and hygrometer.
Which is more economical, an air conditioner or a fan heater?
The cost varies depending on the performance of the equipment, the cost of electricity, kerosene, or gas, the size of the room, the outside temperature, and the duration of use. Air conditioners are characterized by their highly efficient heating using heat pumps, but they are not always the cheapest option under all conditions.
Is it more economical to leave the air conditioner on all the time?
The results will vary depending on factors such as the length of time you are away, the outside temperature, and the insulation performance of your home. For short outings, continuous operation may be more efficient, but for longer absences, turning it off may be more energy-efficient.
Related articles
Related articles
Knowledge
What is sensing?
This section explains the differences between sensors and measurement devices, as well as the purpose and basic mechanisms of "measuring."
Read the articleKnowledge
What is temperature?
This explains the basics of temperature measurement, temperature control, and temperature sensors.
Read the articleKnowledge
What is humidity?
This article provides a clear explanation of the differences between relative humidity, absolute humidity, and dew point.
Read the articleReferences
Reference materials
Energy conservation and indoor environment
Safety of heating appliances
- Japan Gas and Petroleum Equipment Manufacturers Association: "Safe Use of Petroleum Fan Heaters"
- Japan Gas and Petroleum Equipment Manufacturers Association: "Safe Use of Gas Fan Heaters and Gas Stoves"
- National Consumer Affairs Center of Japan, "Long-Term Use of Oil Fan Heaters" (Published October 31, 2024)