Frequently Asked Questions (FAQ)
Can the pulse period (output update period) of frequency division control (zero cross control) be changed via the communication unit?
Pulse interval for frequency division control
Yes, it is possible. The pulse interval for frequency division control can be set via communication as analog setpoint (reference number 41015).
-
Setting range: The pulse period can be set in the range of 0.5 seconds to 6.0 seconds.
-
Function: The pulse period corresponds to the output ON/OFF cycle (output update period) during frequency division control. By changing this, you can optimize the balance between control responsiveness and resolution according to the requirements of application.
-
Initial Value: The factory shipment setting is 1.5 seconds.
