Thermocouple for Extruder C008

This sensor is a thermocouple that is attached to an extruder, injection machine, etc., and is available in two types: straight and L-shaped.

The temperature measurement contact is silver and adheres to the measurement point by means of a spring.

Tip Shape

The tip of the protection part is fitted with a silver contact.
There are two types of silver contact shapes, flat (No. 1) and square (No. 2), and the type to be selected depends on the bottom surface of the temperature measurement mounting hole of the object to be measured.
Adapter: A dedicated fitting for attaching the sensor to the mounting hole of the object being measured.
If there is no pin (φ3) to hold the crimp fitting of this sensor, use this adapter.

Kinds	Straight type (C008-1) L-shaped (C008-2)
Wire	K., E., J., T.
Tolerance	JIS Class 2
Wire diameter	φ0.65mm
Coating Material	Glass wool insulated thermocouple
Measurement temperature	K, J, E - Max 400℃ T--Max 200℃
Protective Tube Material	SUS304
Protective tube outer diameter	φ4.8 or φ6mm
Connection	Outlet or relay connector

*Please refer to the catalog for other specifications.

*Downloading materials is a members-only service.
*If you wish to download, please login as a member and click "Download."

*Downloading materials is a members-only service.
*If you wish to download, please login as a member and click "Download."

*Downloading materials is a members-only service.
*If you wish to download, please login as a member and click "Download."