Overview
The installation of measuring instruments is not a one-time event.
When it comes to measurement and control equipment such as temperature sensors, radiation thermometer, recorders, and controllers, it's not just about selecting the right product, but also about ensuring proper operation after installation.
Over long-term use, the condition of the equipment and sensors may change due to the usage environment and aging.
Furthermore, changes in manufacturing conditions or equipment upgrades may necessitate different measurement and control than those initially used.
consultant
Consult
We will review product selection, functions, specifications, and measurement, control, and monitoring aspects.
Calibrate
Calibration
This confirms the relationship between measured values and references, supporting the reliability of the measurements.
Inspect
Inspect
Check the status of the equipment to ensure stable operation.
Repair
Repair
If a problem occurs, check the status and take the necessary action.
consultant
Consult about products and technologies
"I don't know which product to choose." "I want to confirm if it can measure under these conditions." "I want to know the product specifications and how to use it."
Chino's call center handles inquiries regarding product functions and specifications, as well as measurement, control, and monitoring.
Calibration
Verify the reliability of the measurement values.
When measuring equipment is used continuously, the measured values may change due to the usage environment, aging, and other factors.
Calibration is the process of comparing measured values to reliable standards to verify their relationship to the standard.
When it is necessary to demonstrate the reliability of measurement values for quality control or audits, it is also important to keep records of calibration results.
For those who want to learn more about calibration itself
The meaning of calibration, the difference between calibration and inspection, traceability, and other related topics are explained in detail in "What is Calibration?".
Calibration Service
Choose a calibration method that suits your purpose.
The appropriate calibration service varies depending on the required certifications, the equipment being calibrated, and the scope of the calibration.
JCSS
JCSS Calibration
This calibration service is based on the scope of JCSS registration. Please check the service details for the required calibration scope and target.
CHINO Calibration
CHINO standard calibration
This calibration service is conducted in accordance with Chino's regulations. We will consider your specific needs and required certifications.
Pick-up calibration and on-site calibration
| method | Overview | If it is suitable |
|---|---|---|
| Pickup Calibration | We will take custody of the equipment and calibrate it at Chino's facilities. | In cases where the equipment can be detached and sent separately, etc. |
| On-site calibration | Our service technicians will visit your site and calibrate any equipment that can be serviced. | Equipment that is difficult to remove from the facility, etc. |
There are conditions regarding the equipment, sensors, and calibration scope that can be handled, including on-site calibration. Please check the eligible equipment in advance.
Choose a calibration method
Consider the calibration cycle.
Maintenance
Inspection and repair will help you extend the lifespan of your equipment.
To ensure the stable operation of measurement and control equipment, it is important to regularly check the condition of the equipment.
The inspection will check the condition of the equipment and any signs of deterioration, and consider repairs or parts replacement as needed.
Chino has a service system in place to handle product inspections, malfunction, and repairs.
The details of the support and applicable products vary depending on the product, usage conditions, and region, so please check the details in advance.
Temperature Loop
The service is also part of what supports temperature control.
Temperature control is not simply a matter of measuring the temperature with a sensor.
control, record, and monitor the measured values, and calibrate as needed. Then, we perform inspections and maintenance to continuously maintain that state.
Category
Measurement
Find out the current temperature.
Control
Control
To get closer to the target state.
Monitor
Monitoring
Record the status and identify any abnormalities or changes.
Calibration
Calibration
Check the relationship between the measured value and the reference value.
Service
Service
We will continue operations through consultations, inspections, and repairs.
Measure → control → Monitor → Verify → Maintain.
Service and support are one of the foundations for continuing this temperature control.
related
View the temperature loop in detail
Handling temperature
Supporting the measurement
Support
Consult about product selection, calibration, and inspection.
If you have any questions regarding product selection, usage, calibration, inspection, or anything else, please check with the appropriate contact point for your specific issue.
