Products for domestic use only
The MG series oxygen meter uses a limiting current type zirconia oxygen sensing element and features not only measurement value display but also a variety of alarm functions. It is a digital oxygen meter capable of measuring oxygen concentration from low levels, making it suitable for use as an oxygen deficiency meter or oxygen concentration meter. Depending on the oxygen concentration measurement application, wall-mounted, separate, and measurement monitor/suction type models are available.
| Name | Models |
|---|---|
| Wall-mounted oxygen meter | MG1000-000 |
| Oxygen meter with separate detector (2m lead) | MG1220-000 |
| Wall Mount Oxygen Sensor | MG2100-000 |
| One-point measurement monitor | MG3010-00 |
*The above is for transmission signals of 0 to 250 mV.
| Measurement method | Zirconia solid electrolyte system |
|---|---|
| sampling Method | Natural diffusion type |
| Measurement range | 0-25% O2 |
| Response time | Within 20 seconds (90% response) |
| Accuracy ratings | 0.0~25.0%O 2 …±0.5%O 2 ±1digit 0.00~2.50%O 2 …±0.05%O 2 ±1digit (In a dry gas consisting of oxygen and nitrogen) |
| display method | 3-digit yellow-green LED digital display |
| Analog Output | 0~250mV DC (output resistance 10Ω) |
| Alarm Setpoint | 18% O2 fixation |
| Alarm lamp | Yes |
| Alarm buzzer | Yes |
| Alarm Output | 2 circuits contact capacity: resistance load 110V AC 0.2A, 24V DC 1A |
| Operating temperature limit | 0~40℃ |
| Operating humidity range | 80% RH or less (but no dew condensation) |
| Power supply | 100V AC 50/60Hz |
| Power consumption | 最大8VA |
| Weight | 約500g |
| Mounting Method | Switch box mounting or wall mounting |
Environmental testing rooms, analysis rooms, food fermentation rooms, semiconductor clean rooms, boilers, plant factories
If you register as a CHINO Web member, you will be able to view the product's instruction manual.
If you wish, we will send you the latest information on CHINO products via email.
You must be a login to download.